Ernst

Thanks, Ron, for the detailed and clear tutorial. Thanks Igor, for your fine software. I made a few tests and the transparent scrolling text worked fine. Saludos Ernst

Jim: Thanks to you, too. Certainly it will be a most desired and useful improvement in PTE. Regards Ernst

Bill, I am sorry that the link to my forum did not work. I forgot to change the signature when I reinstalled the forum in another folder. The route has been corrected now in my signature. Cold: Yes, for our standards it´s cold around here (we have got a polar wave in the last week). Thanks for all your time to explain working straight forward or around the problem I posted. I will read carefully and work on some of the advices, and answer later again. Maybe there will be other posts in the next time, so I can react to them, too. Thanks again Ernst

Thanks, Bill. Certainly a very good and clear explanation on how to proceed, while we wait to get eventually also a programmed pause for the shows. What I did: 1. Made a show and SYNCed it 2. Last slide customized to start external application, that is another NON-SYNCed show. I called it Menu. Menu is a one-slide-show, and it is set to "When show ends, keep last slide in show on screen. This works fine even as a starting Menu, for several shows. On this one-slide-show I put buttons, that lead to different synced shows, all ending with a customized last slide, with a "run application and close". The run application is my one-slide-show (the menu). Excellent! 3. The only thing that happens is that the so-called linked shows (from the menu) should eventually be your own shows, where you have a control on the last slide to start the "menu" application. I for example, linked from the menu to a show called Kirov, made by Igor at the beginnings of PTE. This show loops. So, no way to have my new system working with these kinds of shows, where I can´t control the last slide. The show never ends, unless you ESCape. And then you are at your desktop, and not at your Menu, unless you have your menu slideshow open. Since you told it to run application and exit, it will no longer be there. This takes me back to what I proposed (maybe two years ago), in order to have a second show open, with menu buttons, and looping all the time. So, even if you ESCape from a looping show, you land on your Menu-show. So your suggestion is a big step forward, but maybe only working with shows that one personnally can control, as to configure their last slide. Will keep experimenting. Thanks again, for your time and generosity. Regards Ernst

I am amazed with the latest developments of PTE. Thanks Igor for your continuous work, effort and time in the development of PTE. Let me play newbie for a while, with the following: PART 1 1. I am testing a show, synchronized to length of sound file. 2. I want that the last slide... "When show ends keep last slide in show on screen" to be on. 3. I put a button with the action: "Go to first slide" as an Object on that last slide that stays on screen. It did not work. I tried also with an hyperlink. Nothing. 4. Then I placed a button on a slide about in the middle of the show, Go to First Slide, just for testing. My conclusion: When working with a synchronized show nothing of the above is possible, unless I do not use synchronized show, right? PART 2 1. I know this has been an old discussion in the forum (the old forum and this one) about menus, and I remember that I made some posts in the old forum about a routine to work as it were the option of menus in the program, bypassing the lack of menus options. 2. When I want a viewer, who gets to the last slide (that one fixed on the screen) to go to slide 1 (that is reinitiate the show), or have the option to go, for example to a part 2, or 3, from that slide, how should I operate? Questions: 1. Should I use non synchronized show, or synchronize custom each slide, and then this option for navigating ( I mean buttons and hyperlinks, not the navigation bar) will be active? 2. Maybe I am doing something wrong? I must confess that I did not work with PTE in the last few months, and maybe did not closely follow the very important improvements in PTE and all the discussion about this topic in this forum. My excuses. Your guidance will be welcomed. BTW, Hola Guido ! Saludos ! Regards Ernst

Sometimes when editing a show I get error messages. When I want to preview, I get an error message, "background image so and so (path) was not found". (The preview does not run, not even up to the conflicting slide). OK. Thanks for the message. But, where is the conflicting slide? The message error shows me only the name and path of the missing file (let´s say a background texture I had moved to another folder), but it does not tell me in what slide it found the missing file. Sometimes I combine customized and non customized slides. It is hard to find out where (usually customized slides) is the slide that has an erroneous path. The error appears as many times as there is a conflicting slide, and you have to discover (search) one by one which was the bad one. In this you have to go back and forth to the errors window. I will appreciate a solution to discovering the conflicting slide. And since "If you are not part of the solution, you are part the problem", may I suggest (if I am not too lost in the forum today) that in a given case, future editions of PTE could consider this aspect? That is, in the example I described, would it be possible to point to the slide that is causing the problem, or tell me, it´s the general settings? Thiswill help in the editing, especially if you have a larg amount of slides. Maybe I will discover (or you will tell it to me in anger) also that this has already been discussed in this forum So, please, excuse me for not reading enough of the older posts (I like to play newbie sometimes). In that case, please be patient with me and point me to the corresponding topic. Regards Ernst

Jim: I am very impressed with your Tumblee show. A huge amount of work. Nice clean pictures and movement, nice version of music. My congratulations !!!! It went fine on my machine. Exact synchronization, clear ending and closing. No looping. 1.6 giga, geforce2. I ran it both from within the zipped file, and also unzipped and ran it. No difference (in case it could have meant any difference). Regards Ernst

I think that you may try this. 1. Prepare all your images, and add them to the show you want to construct. 2. If you want a title page, customize the first slide, with whatever background you want (tiled image, gradient or solid color) 3. Edit your object (example, add a text) 4. Uncheck (down right side of the working window, where there are three horizontal window), the first slide. That means there will be no image showing, just the background and whatever object (in this case your title) you have chosen. As your first image that you will uncheck and it will become hidden, you may use whatever image you want. So you can prepare several title pages as needed. Title page, credits, legends, etc. Hope it works Ernst

OK from here Wednesday 19, 6 AM. Ernst

Well, I should have stopped after Ian´s clear response to my question. Ian was very precise answering all my doubts. Now I feel we are going off-road, and so I want to stop discussing more on this topic. Thanks, Ian, thanks Ken, I am using Nedstatbasic for my traffic statistics, and also my web-hosting service provides me with much more detailed information on traffic. But I feel now we are going nowhere and I feel guilty to having included data on traffic and stastitics for my site, as an example of the general trend of usage of resolution at PCs, and then derived to family and friends. I have messed things up.. And on how many people use what resolution. Maybe I made a mistake, and this topic discussion could go forever and to nowhere. I´ll stop here, OK? I hope also that errors have rights, in the present time we are living in the world. Regards Ernst

Sorry, Ken. I don´t have those numbers. What I posted was an instantaneous statistics of the hit (visit) counter am using at my web site. They do not give the type of computer visitors are using. BTW, those numbers change also, depending who is visiting at that particular moment. Just took a look, and it was 58% for 800x600 and 38% for 1024x768. I do not know (only very approximately) how many of my friends and family members have notebooks and PCs. And in addition, whether they are using PCs or notebooks to watch shows. Additionally what their screen resolution is. And ... what the speed of their processor is. I am sorry that I could not answer your question precisely, but only with an excuse. Regards Ernst

Thanks, Ian for your clear and detailed (and generous) explanation. It is clear to me now. I want to process some shows with a navigation bar, and I didn´t see it before. This will take care of that too, I think. I will work with 800x600 images, and some reduction of the screen to maybe 75%. I have seen also from the visitors of my web site, that there is still a high proportion of people using 800x600 resolution 56%, as compared to 41% with 1024x768. The gap is getting smaller although. But 640x480 are only 1% Although it is an Internet visitor statistics, I feel that this trend will also be maintained with persons (relatives and friends) to whom I eventually will give PTE shows, and who still use extensively the 800x600 screen resolution. It is also funny to verify, that many persons don´t even know that their monitor allows a higher resolution. Regards Ernst

Hey, somebody there? Some expertise on this topic in the forum? Regards Ernst

Thanks, Jim. Great! Iwill continue with my experiments Regards Ernst

I have been playing a bit now with resizing the window for a show (at the screen options, % of the normal size of the image). And with an mp3 file as background sound. I have images of 1024x768, and fade-in transition. It seemed to me that when I resize the window (I have been using 75%) the show runs smoother that with a 100% screen. Is that right? If so, how does it work? I understand that the kb of the image doesn´t change, and so doesn´t the size of the slide either, right? It is justr a change on the screen Is this due to the loading time of the image on the screen that the show goes better. That is, the resized window loads faster? Even if I use the resized window, with a smaller size of the image (on the screen), using 1024x768 images adds very much to the total weight of the show (mb). Right? If everything is Yes, then I feel very comfortable today, I am confirming my knowledge, and will get me a drink this afternoon. Regards Ernst

Ian: I was wondering if that may be the solution to the menu page. 1. Could a PTE slideshow be set up with only one slide? In that case, that could be the menu page, with buttons on it. This would be the first and the last slide at the same timne, staying on the screen. Without this one-slide show closing, it would be possible to click on buttons and open other exe shows on top of that one. 2. When each of these shows ends, it should then end with a slide that is a copy of the last slide (and only-one) of the menuslideshow. This would be great. Will try it this afternoon. I hope I understood well your comment, and am not asking for the impossible Regards Ernst

I don´t know if it is the same, but in the old forum there was a discussion on menu pages. I had made a show with a starting page and 18 buttons on it. Once you selected the submenu (another exe) you started that particular show, BUT the menu page stayed open, looping. As such, there is no possibility to put music on it, because it would collide with the sound of all your submenus. I decided not to put sound on the menu page, and it worked fine. So, when the submenu (one of my 18 files) ended, it closed and the menu page appeared. The only thing I should take care about is not to click a submenu button twice, because it started the same show again, and then there was a show echoing all the time. Regards Ernst

Thank you, Guido. It´ s nice to have friends like you in the world. It´s nice also to be young (of heart, of course!) . Kindest regards Ernst

Thanks, Casey. This is certainly a very good source for sounds, that we might use in presentations. I remember that in the old forum, many of these and other sources have been mentioned and posted by members. With that experience, where could we keep a record of all what we discuss in this forum, so that in the event that something goes wrong again, now with the present forum, we do not lose all that valuable information. Although it was discussed earlier, apparently there are difficulties to recover the old material. I hope it is still possible. Regards Ernst

I ran into the same aspect. I think it´s both that sum up to the total for that particular slide. It happened to me with images of 1024x768, and even a fast processor and video card that even so, couldn´t handle it. BTW. Flight of the bumblebee by Rimsky-Korsakov? Regards Ernst

Hi, Casey: Glad to meet you here at this spot of cyberspace. Yes, Junior Member sounds great ! You are right. PTE has changed quite a lot along time. I do not remember exactly when I met the old forum (at what version of PTE), but now v.4.01 is really great. What a growth, how much brain and effort has been put in its development! It´s a nice software with pleasant results. And it stays firmly and solid in this so hard competing arena. Regards Ernst

Bob and Guido: Thank you so much for your kind welcome words. Bob: Yes, grapes are one of the most important export items of agricultural products of Chile, and also wine. I am glad we can share them with you there.. Guido: Yes, back in town. Just started my work again, teaching and also having fun with PTE. Promise to work on presentation(s?) I am still "young" (68) but I know you mean my participation in the forum. Well I am glad that I could move from the old forum where I was Senior, Advanced? to "young" in this forum. It is always good for the soul. It is certain, I am very far away from your 10% of all posts in the forum. I have only slightly over 1%. But I will keep trying to improve. Regards Ernst

Jim: OK. Really no problem for me. I certainly want to (and have to) update my knowledge during the next days, about what has already been discussed in the forum. Regards Ernst

Excuse me, Jim, and others: I maybe didn´t have the courage to read through the 127 topics. And sometimes topics are not self-evident, as to find out which is the pertinent one. The idea, long requested to have subtopics is great and I am glad that we will have categories soon. Again, my excuses if I touched a many-times-discussed topic. I am also glad to know that this feature has been requested, because I think it will be really useful. Maybe also the access to the synchronization window could be close to the main page of PTE (or in it), with a tab(button) because it is very important. It is usually the one you work with during the preparation of the whole show. Now it is three steps away. If this last paragraph was also discussed then I will take again a vacation to read all the topics in the forum before giving my opinion again (just joking). Regards Ernst

Empty message. I posted it in the wrong thread. Sorry Ernst