Igor Posted August 7, 2017 Report Share Posted August 7, 2017 Jean-Cyprien, Our mistake, pease try a new FontTest 8: http://files.wnsoft.com/test/FontTest8.zip Quote Link to comment Share on other sites More sharing options...
Mick Posted August 7, 2017 Author Report Share Posted August 7, 2017 Hi Igor. Just to keep up with Jean and the rest I ran Test 8 and there was no error messages and my version 9.0.11 is working fine. Many thanks for your interest and help. Mick Fontlog attached fontlog.zip Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 7, 2017 Report Share Posted August 7, 2017 Hi Igor I ran the test8 and the error messages are always alive. Fontlog attached fontlog.zip Quote Link to comment Share on other sites More sharing options...
Jean-Cyprien Posted August 7, 2017 Report Share Posted August 7, 2017 Hi Igor, Here is the Fontlog file of yvan Good luck, and thanks FontTest8_yvan.zip Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 8, 2017 Report Share Posted August 8, 2017 Hi Igor another one Diapositif member (Cerbere) tested yesterday your new Test 8 : no error message for him. Attached his Flontlog file Regards FontTest8-cerbere.zip Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 8, 2017 Report Share Posted August 8, 2017 Hi Igor about the test performed by Yvan (see Jean Cyprien'S post above) the error messages were alive Quote Link to comment Share on other sites More sharing options...
Igor Posted August 8, 2017 Report Share Posted August 8, 2017 Thanks again! Please run FontTest9: http://files.wnsoft.com/test/FontTest9.zip Probably it will be the final test app. Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 8, 2017 Report Share Posted August 8, 2017 Hi Igor I ran the FontTest9 : it's OK for me, no error message this time Find attached my Fontlog file Regards fontlog.zip Quote Link to comment Share on other sites More sharing options...
Jean-Cyprien Posted August 8, 2017 Report Share Posted August 8, 2017 Hi Igor Same thing for yvan : no error message. Here is his Fontlog file Thanks FontTest9_yvan.zip Quote Link to comment Share on other sites More sharing options...
Mick Posted August 8, 2017 Author Report Share Posted August 8, 2017 Hi Igor, Font test9 complete no error messages. My version 9.0.11 working well. Fontlog9 attached. Mick fontlog9.zip Quote Link to comment Share on other sites More sharing options...
Igor Posted August 9, 2017 Report Share Posted August 9, 2017 Thank you very much for your help! We found an exact reason of this problem and fixed it completely. You can continue use latest official version 9.0.11 where this error message does not occur. We'll include the final solution to a nearest update. Quote Link to comment Share on other sites More sharing options...
Igor Posted August 9, 2017 Report Share Posted August 9, 2017 You can try final version with this fix: http://files.wnsoft.com/test/picturestoexe-setup.exe It installs as v9.0.12 (Beta). Quote Link to comment Share on other sites More sharing options...
Jean-Cyprien Posted August 9, 2017 Report Share Posted August 9, 2017 Thank you very much to you too, Igor ! Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 9, 2017 Report Share Posted August 9, 2017 Hi Igor I juste installed the last PTE 9.0.12 and all is OK regarding the font button feature. I just noticed a little latency between the time I clicked on the font button and the available policies list to be displayed (I didn't feel that with the 9.0.11) Regards Quote Link to comment Share on other sites More sharing options...
Mick Posted August 9, 2017 Author Report Share Posted August 9, 2017 Hi Igor, Thank you for your help. I too installed the 9.0.12 and the font button is working fine but like chanfi22 there is a delay after pressing the font button and the display of the font list. Mick Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 10, 2017 Report Share Posted August 10, 2017 Hi Igor Yvan (French DIAPOSITIF member) tested successfully the 9.0.12. But he noticed a very long latency (up to 10 seconds) On my side I verified with the 9.0.11 and noticed a little latency about 1 to 1.5 seconds. With 8.0.22 no latency observed Question : for our knowledge could you explain (in simple words) the exact reason of this problem? Regards Quote Link to comment Share on other sites More sharing options...
Sybalan Posted August 10, 2017 Report Share Posted August 10, 2017 Thanks Igor, Jean-Cyprien, Mick and Davegee, For all your hard work in solving this problem, Just to let you know all your hard work and efforts are greatly appreciated Thank you S Quote Link to comment Share on other sites More sharing options...
Jean-Cyprien Posted August 10, 2017 Report Share Posted August 10, 2017 You're welcome, Sybalan. We all like PTE very much. In France we have the same word "aimer" to say "to like" or "to love". And it is said that when one loves (or likes !) , one doesn't count ! Regards Quote Link to comment Share on other sites More sharing options...
Igor Posted August 10, 2017 Report Share Posted August 10, 2017 Thanks 15 hours ago, Mick said: Hi Igor, Thank you for your help. I too installed the 9.0.12 and the font button is working fine but like chanfi22 there is a delay after pressing the font button and the display of the font list. Mick We will try to speed up access to list of fonts in next updates. 6 hours ago, chanfi22 said: Question : for our knowledge could you explain (in simple words) the exact reason of this problem? For some fonts (Adobe Arabic, Adobe Arabic Regular) a system function (in Windows) CreateFont() works correctly, but a call of GetTextMetricsW() returns result "false". It seems that this problem occur if a cache of fonts exists in Windows folder. Really strange problem. Quote Link to comment Share on other sites More sharing options...
chanfi22 Posted August 10, 2017 Report Share Posted August 10, 2017 4 hours ago, Igor Kokarev said: Thanks We will try to speed up access to list of fonts in next updates. For some fonts (Adobe Arabic, Adobe Arabic Regular) a system function (in Windows) CreateFont() works correctly, but a call of GetTextMetricsW() returns result "false". It seems that this problem occur if a cache of fonts exists in Windows folder. Really strange problem. Hi Igor I confirm this issue regarding the cache font. When erasing the cache font file " Fntcache.dat " in Sytem32 directory the issue was not alive. But following the next computer restart without erasing the Fntcache.dat file the issue was on. Strange problem, I agree. Thanks for your explanation and your ability to solve this issue. Regards. Quote Link to comment Share on other sites More sharing options...
Sybalan Posted August 11, 2017 Report Share Posted August 11, 2017 On 8/10/2017 at 0:37 PM, Jean-Cyprien said: You're welcome, Sybalan. We all like PTE very much. In France we have the same word "aimer" to say "to like" or "to love". And it is said that when one loves (or likes !) , one doesn't count ! Regards Hi Jean-Cyprien, I love PTE, I first found out about it through the Camera Club, some of the members used it for making their AV for our AV competitions, sadly not enough member entered the AV competition now, only 3 of us last season, so the club has stopped doing that competition. I like to make AV's with my images for myself it's a nice way to look at them, also to make for special birthdays for family with all the old photographs, There are a few software programs I would not be without and PTE is one of the top three Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.