Picsel Posted August 9, 2009 Report Posted August 9, 2009 Daniel,Further inspection of your 2 project files reveals that you have enabled Show Copyright Logo but have no image entry selected. If you disable the checkbox the blue missing image display will clear.This however seems to be a bit of a bug issue ... if a user enables the Copyright Logo but fails to make a image selection.hello nobeefstu,I confirm you are perfectly right, I have checked at home, that is the only difference even with other projects. I cant say why but it is a fact the "Show Copyright logo" box was checked. After disabling it, everything is OK. Thanks for your help.If Igor wanted to fix this point, I would suggest to replace the check box by a button for a direct selection of the copyright logoDaniel.
Igor Posted August 10, 2009 Report Posted August 10, 2009 We'll fix this issue with "Show copyright image" option. Thanks!
Igor Posted August 11, 2009 Report Posted August 11, 2009 Sorry, I didn't understand this problem. Please send me one slide project with one text object to illustrate this issue. And two screenshots - how it looks in v5.6 and v5.7 Beta.
xahu34 Posted August 12, 2009 Report Posted August 12, 2009 Igor,there are several contributions in this thread that directly refer to announcements of particular beta versions. So, in my opinion, it has not been a good decision to concentrate these announcements at a separate place Regards,Xaver
thedom Posted August 12, 2009 Author Report Posted August 12, 2009 PicturesToExe Deluxe 5.7 Beta 9 is available+ Added new option to Shadow properties window - "Shadow for 3D mode".It smells very good !
Igor Posted August 12, 2009 Report Posted August 12, 2009 Xaver,I didn't think about this unexpected problem. My idea was make one topic for announcements of v5.7 Beta releases. It will allow users receive email notifications about new beta versions via "Track this topic" function under "Options" button.
Igor Posted August 13, 2009 Report Posted August 13, 2009 AbdolReza,I see that text rendering slightly differs from previous version on attached screenshots.Some text labels even look more clear in the new version (as for example "List by alphabet").In my opinion you set too small visual size of text objects. Nor current nor previous version are not optimized to display extremely small text. You will face similar problem with Adobe PDF. Even having special text rendering algorithm optimized for text reading in web browsers it will be difficult to read such small text.
mightec Posted August 13, 2009 Report Posted August 13, 2009 Version 5.7 BETA9I am experiencing problems with the 'Linearity' settings, I have the keypointd setup to pan and zoom an image. When I change from Linear to any of the other settings I loose the zoom effect, is this a bug?
Lin Evans Posted August 13, 2009 Report Posted August 13, 2009 Hi Mike,Could you zip up this and post it? I'm not seeing any problems in Beta 9 with pan and zoom when using smooth, etc., so maybe looking at your file would help discover where the problem lies.Best regards,Lin
thedom Posted August 13, 2009 Author Report Posted August 13, 2009 I'm not seeing any problems in Beta 9 with pan and zoom when using smooth, etc.,Me neither.Maybe it's absolutely not the problem but if you have more than two keypoints for an objct and want to apply an other effect than linear correctly, you have to separate each section in order for the non linear speed option to be applied :click on Setting up... (at the top of the speed options) and then click on Separate here.
mightec Posted August 13, 2009 Report Posted August 13, 2009 DomIt sounds that this maybe the problem, sorry for the false alarm, will try what TheDom suggests and give it another go.
Picsel Posted September 10, 2009 Report Posted September 10, 2009 Xaver,I didn't think about this unexpected problem. My idea was make one topic for announcements of v5.7 Beta releases. It will allow users receive email notifications about new beta versions via "Track this topic" function under "Options" button.Yes Igor, In my opinion too that was a very good idea to separate new beta release announcements and discussions about it. Things were clearer and it was easier to check and to follow your project progress. I can guess that the problem Xaver pointed out comes from the fact that several threads were open at the same time for discussions and it was not obvious to know in which we should post. My suggestion should be to keep a dedicated topic for announcements, to collect inside a closed topic all existing discussion about previous releases and to open a dedicated topic for discussion for each new beta release to come. Daniel.
Barry Beckham Posted September 13, 2009 Report Posted September 13, 2009 IgorI have created a few Mac shows and all the feedback is good apart from any thin lines applied. which seem to be lost along the bottom edge onlyThis has now happened on a number of different Mac's, is that something that needs a look?
Igor Posted September 14, 2009 Report Posted September 14, 2009 Barry,I have created a few Mac shows and all the feedback is good apart from any thin lines applied. which seem to be lost along the bottom edge onlyThis has now happened on a number of different Mac's, is that something that needs a look? I confirm this issue. We'll check up today. Thanks.AbdolReza,Thanks, I'll rework this place in the program.Picsel,OK, I'll separate announcements and discussion of beta versions.
Igor Posted September 14, 2009 Report Posted September 14, 2009 Barry,We've reproduced this visual bug under Mac. We'll fix it in Beta 14.
Igor Posted September 14, 2009 Report Posted September 14, 2009 Barry,Fixed in Beta 14. Available now.
Raymond Posted September 16, 2009 Report Posted September 16, 2009 I have of make a mistake about place to ask my question.I thus rest(base) her(it) here.EXE on MAC A slide show of 273 embellish with images 278 MB.On iMAC / OSX 10.5.7 / Intel Core2 Duet 2,8 Ghz / 2GoDDR2 / ATI Radeon HD on 2600 256 Mb...... Impeccable On MAC portfolio pro / OSX 10.5.7 / Intel Core Duo 2.53 Ghz / 4 Go 1067 Mhz DDR3 / NVIDIA GeForce 9400M the sound drops out of the image until destroy(annul) the synchronization. The transitions between images do not seem affected(allocated).Q' do you think of it?Thank you in advance for your reponse Cordially Raymond FRANCE
Igor Posted September 16, 2009 Report Posted September 16, 2009 Raymond,Thanks for your report!We've sent you a personal message via forum. Please read it. We need more info on this issue.
Henri.R Posted September 20, 2009 Report Posted September 20, 2009 Igor, thank you vey much for the new version 6(beta). All new possibilities are not only very useful, but are enlarging my creative skills as well! And of course I'm very grateful for the new Mac executable addition... And, while you and your team are working on a real Macintosh version, I'll be glad to do some beta testing again. Just a pity that Apple in the new iMac 20" doesn't use a separate graphical card anymore, as I've read it's a shared version now like the Macbook is using. The 24" version seems to keep a separate card.regards,Henri.
thedom Posted September 20, 2009 Author Report Posted September 20, 2009 Igor, a minor problem with beta 15 : SHIFT+mouse No problem to move an object horizontally but vertically, you can not move it a few pixel up or down. At the begining, the move is not effective and suddenly, the object will "jump".
Igor Posted September 21, 2009 Report Posted September 21, 2009 Dom,Thanks, we're working on this problem now.
Henri.R Posted September 21, 2009 Report Posted September 21, 2009 Yesterday I downloaded version 6 Beta 15; after installing I don't see a 3-D button in O&A -> Animations. In fact, I don't see a 3-D button anywhere in the application....Is there something wrong or do I something wrong? regards,Henri.
davegee Posted September 21, 2009 Report Posted September 21, 2009 Henri,Check, when the programme opens, that it says PTE Deluxe 6.0 Beta 15 in the top left corner?DG
Picsel Posted September 21, 2009 Report Posted September 21, 2009 Yesterday I downloaded version 6 Beta 15; after installing I don't see a 3-D button in O&A -> Animations. In fact, I don't see a 3-D button anywhere in the application....Is there something wrong or do I something wrong? regards,Henri.Hello HenriThe 3 D button will appear only at a key point on the time line. If you are not on a key point you cannot see it.Best regardsDaniel.
davegee Posted September 21, 2009 Report Posted September 21, 2009 You are correct Daniel - If you are not at a Keyframe it says "Create new keyframe here".DG
Recommended Posts